china factory Double Registration Semi-Automatic Offset Printed Box Die-Cutter manufacturers

Merchandise Description

MY E Collection

  • Requirements:
Product Unit MY1two00E MY1300E MY1five00E
Max. Paper Size  mm 1200X780 1300*960 1500X1100
Min. Paper Size mm 350X350 four hundred*410 500X410
Max. Die-cutting Measurement mm 1180X760 1280*940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Working Force T three hundred three hundred three hundred
Max. Paper Thickness mm one-7 1-7 1-7
Die-reducing CZPT mm ±0.5 ±0.five ±0.5
Overall CZPT KW fifteen 15 19
Whole CZPT ght T 12500 14000 17000
Overall Dimension mm 6730*4000*2145 7250*4100*2145 7700*4600*2205
  • Functions of the device:

Main Attributes:

  • The particular reduce composition makes the cutting system movement like a scissor, it will recognize a entire and easier minimize.
  • Main CZPT makes use of alloy copper materials, after the skilled operator’s handbook scraping remedy and stringent normal screening, it can makes certain the driving components 10 many years lifestyle.
  • The major chains adopt imported British Renold brand, the distinctions of 10 chains are considerably less than .2mm.
  • The link in between CZPT and driving shaft adopts sleeve and pin composition making certain a sturdy connection.
    • Velocity:  

The equipment adopts frequency controller to achieve stepless pace acceleration which can reach to 4500 occasions for every hour. Throughout genuine generation, it can normally operate at 3600 to 4000 moments for each hour according to the good quality of the board. If the quality of the paper is excellent, a very good operator even can run the device at 4200 times for every hours with no emotion as well difficult.
 

  • Basic safety:

As it is shown in the photograph of the device, the device adopts rear element paper feeding approach which keeps the operator away from the die-reducing component. The mounting and adjustment of the die plate is also done outdoors of the die-cutting portion with sensors and detectors at die-chopping part to ensure that the device can not be began when the die-slicing plate is at adjustment status.
In addition to the sensors at die-chopping element, there are sensor or method switches at window part to make the entire device at monitoring standing to guarantee its security.

  • Procedure ease:

There is Male-equipment interface installed in the control panel which will displays the protection status of the machine as well as malfunctions to facilitate the operator. Camera is also mounted in front of the operator for him/her to check the procedure status at the shipping and delivery element.

  • Principal Constructions and Important Content Utilised
    • 4 Major Large Components:

They are referring to: bottom station, transferring platform, higher platform and machine wall. The bottom station is manufactured of gray solid iron -HT two hundred the relocating platform is ductile iron – QT forty two-10 and the device wall is high quality A3 metal.

  • Main CZPT :

The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT types a shifting established to ensure stable pressure out set of not considerably less than three hundred tons.

 
The material for the worm shaft is 40Cr with quenching therapy and equipment hardness HRC 45-fifty. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is employed is CZPT . The bush is copper alloy ZQSn6-6-3.

  • Die-chopping and Creasing Component:

The generate is transferred by way of crank rod to pendulum which will bring the shifting platform to shift up and down to reach die-cut and creasing purpose.
The pendulum is created of high quality ductile iron. The pendulum axis is accomplished by induction harden with floor hardness HRC 43-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely adhere to the specification of 1080 variety automated die-cutting and creasing device. Compared with automated die-chopping and creasing machine which is employed for cardboard die-reducing, this kind of semi-automated die-cutting and creasing device is mostly utilized for corrugated board which requirements significantly less pressure for die-chopping, in this situation really some producers have manufactured scaled-down width on the pendulum and smaller diameter on the pendulum shaft. We maintain wider pendulum and bigger diameter on its shaft to make CZPT machine final for a CZPT er life.
 
 
The die-reducing plate utilizes 7 mm 75 Crl plate which has far more hardness and existence span than the manganese plate.  

  • Board Conveying:

 

It adopts 3-cam intermittent positioning device to make sure the boarding conveying accurate and stable.
The machine makes use of gripper bar variety with 12A CZPT joints chain which is significantly less in weight and significantly less shock to the intermittent device below the precondition to make certain the power of the chain. The brand name of the chain is Remold U.K with substantial exact and good quality. .    
The Gripper bar adopts aviation aluminum with three bridge sort- light in weight and high in strength.

  • Electric Portion

 

The electrical parts are designed and assembled in accordance to the CZPT pean CE normal and utilizes entire world broad identified brand name merchandise.

  • Set up of Die

The die mounting and dismounting adopts facet withdrawing techniques which time conserving and effortless for procedure.
There are two methods for the fixation of the die-either by bolt or clippers which are subject to CZPT er’s guidance.
The chase locking is pneumatic which is straightforward, hassle-free and dependable.

  • Unique Characters of Our CZPT :
    • Clever And Special CZPT Lay Design:

Compared with the card board sheet, the corrugated board has much more strength. If the corrugated board abnormally reaches to the CZPT lay, it will damage the CZPT lay and the gripper bar when the CZPT lay reaches to its highest placement.
Usually the producers will set up sensors on this portion to stop the machine when the paper is fed abnormally to the CZPT lay. Nevertheless, when the machine is managing at the higher pace, the inertia will provide the machine to operate for a although to make the CZPT lay to its optimum stage and then also injury the CZPT lay and the gripper bar.
Our unique layout is that when the abnormal board feeding transpires and becoming detected, the CZPT lay can by no means reaches to its maximum position which tends to make free from CZPT lay and gripper bar damages because of irregular paper feeding.
As it is CZPT special design and style, so there is no image to be shown here.

  • Optional Shipping System:

In accordance to the requirement of the shopper we can do the supply platform both square sort or E variety (as revealed in the photograph) . If the shopper has enough pallets, he can select square type. If the client does have enough pallet, he can choose, E kind system for which will also offer 4 shipping and delivery trolleys.      

  • Pneumatic Preloading and CZPT ing Step Device:

 

The preloading gadget is pneumatic driven. When one paper dimension is established, when you do other pile of preloading, there is no trouble of you to reset the preloading system, you can just push the button and the device will do for you.
The lifting step device is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Very some of the die-reducing device producers use direct feeding strategy which is the operator will feed the board immediately to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 CZPT s which helps make the board feeding work hard and inaccurate.
 
Our machine employs an added dance roller feeding method whose board feeding time can be increase to .6 CZPT . Collectively with the conveying parts it can make an less difficult perform of the operator and CZPT er in performance of the device.
For illustration:  If an operator operates the direct feeding semi-automated die-reducing equipment at 3300 sheets for each hour, he can easily operate CZPT equipment at 3700 – 4000 sheets for each hour.

  • Conveying Part:

 

The board gained by the dance roller will go by means of a conveying part with belt conveying and belt urgent which tends to make the board being pressed just before reaching to the CZPT lay.
Before the board reaches to the CZPT lay, he will be repositioned by the aspect lay.
By these techniques, the board conveyed by the dance roller will be a lot more correct and steady when they get to to the gripper bar.
There is also detector to detect the status of the board. If board does not arrive to the CZPT lay at regular position, the detector will deliver indicators to quit the device.

  • Configurations:
Identify Model and Origin Remarks
Bearing SKF Swiss Important portion
IKO Japan or HangZhou, CZPT Not crucial portion
Chain Renold U.K Main Chain ( Discrepancy of considerably less than .2 mm for for every 10 chains of equipment chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo CZPT ctric Swap Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main CZPT Siemens Joint Venture
PLC Delta, ZheJiang  
Man-device Interface Delta  
Pneumatic Areas Sunrise, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

 
 

china  factory Double Registration Semi-Automatic Offset Printed Box Die-Cutter manufacturers