Tag Archives: automatic cutting machine

china sales Automatic Flatbed Die Cutting and Creasing Machine with Waste Stripping (SZ1200P) manufacturers

Product Description

Semi-computerized die- cutting and creasing machine with stripping device

  • Specifications:
Product Unit MY1two00EPA MY1300EPA MY1five00EPA
Max. Paper Dimension mm 1200*780 1300*960 1500*1100
Min. Paper Dimension mm 350*350 four hundred*410 540*410
Max. Die-reducing Dimensions mm 1180*760 1280*940 1480*1080
Max. Speed sh/h -5500 -5500 -4500
Max. Working Pressure T three hundred three hundred 300
Max. Paper Thickness mm one-seven 1-seven 1-7
Die-chopping CZPT mm ±0.five ±0.5 ±0.5
Total CZPT KW sixteen 16 19
Total CZPT ght kg 15500 17000 20000
General Dimension mm 7280*5000*2350 7800*5100*2345 8350*5700*2405

 
 
. Attributes of the machine:
Principal Functions:

  • The minimize composition makes the cutting system motion like a scissor, it will recognize a complete and simpler reduce.
  • Main CZPT utilizes alloy copper substance, after the experienced operator’s manual scraping treatment method and strict standard testing, it can assures the driving components 10 years lifestyle.
  • The major chains undertake imported British Renold brand name, the differences of ten chains are much less than .2mm.
  • The link among CZPT and driving shaft adopts sleeve and pin framework making sure a strong link.
    • Pace:  

The equipment adopts frequency controller to attain stepless velocity acceleration which can get to to 4500 occasions for every hour. For the duration of real generation, it can generally operate at 3800 to 4000 times per hour in accordance to the good quality of the board. If the quality of the paper is good, a excellent operator even can function the equipment at 4200 occasions for each hrs without emotion way too hard.

  • Protection:

As it is shown in the photograph of the device, the equipment adopts rear component paper feeding method which keeps the operator away from the die-chopping part. The mounting and adjustment of the die plate is also accomplished outdoors of the die-reducing part with sensors and detectors at die-cutting portion to ensure that the equipment can not be started when the die-reducing plate is at adjustment standing.
In addition to the sensors at die-reducing component, there are sensor or strategy switches at window component to make the complete machine at monitoring status to guarantee its security.

  • Procedure comfort:

There is Male-equipment interface put in in the control panel which will displays the protection position of the machine as properly as malfunctions to aid the operator. Camera is also put in in front of the operator for him/her to check the operation status at the shipping element.

  • Major Buildings and Essential Substance Used
    • Four Main Big Parts:

They are referring to: bottom station, relocating platform, upper platform and device wall. The base station is manufactured of gray cast iron -HT two hundred the transferring system is ductile iron – QT 42-10 and the device wall is high quality A3 metal.

  • Main CZPT :

 
The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT kinds a relocating established to ensure stable pressure out set of not significantly less than three hundred tons.
The materials for the worm shaft is 40Cr with quenching treatment and gear hardness HRC forty five-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is used is CZPT . The bush is copper alloy ZQSn6-6-3.

  • Die-reducing and Creasing Component:

The generate is transferred by way of crank rod to pendulum which will carry the transferring platform to go up and down to get to die-minimize and creasing goal.
The pendulum is manufactured of large top quality ductile iron. The pendulum axis is carried out by induction harden with floor hardness HRC forty three-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely comply with the specification of 1080 variety computerized die-slicing and creasing machine. When compared with automatic die-chopping and creasing device which is used for cardboard die-reducing, this sort of semi-automated die-cutting and creasing device is primarily used for corrugated board which demands significantly less force for die-slicing, in this situation really some producers have created smaller sized width on the pendulum and more compact diameter on the pendulum shaft. We hold wider pendulum and greater diameter on its shaft to make CZPT machine very last for a CZPT er existence.
The die-cutting plate makes use of 7 mm seventy five Crl plate which has more hardness and life span than the manganese plate.  

  • Board Conveying:

 

It adopts 3-cam intermittent positioning gadget to make certain the boarding conveying correct and stable.
The machine employs gripper bar kind with 12A CZPT joints chain which is less in weight and much less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with substantial specific and high quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge type- mild in fat and higher

  • Electric Portion

 

The electrical areas are developed and assembled according to the CZPT pean CE regular and uses globe vast known manufacturer merchandise.

  • Set up of Die

The die mounting and dismounting adopts aspect withdrawing methods which time saving and simple for procedure.
There are two ways for the fixation of the die-possibly by bolt or clippers which are subject to CZPT er’s guidance.
The chase locking is pneumatic which is simple, hassle-free and trustworthy.

  • Special Figures of Our CZPT :
    • Clever And Special CZPT Lay Design and style:

 
When compared with the card board sheet, the corrugated board has a lot more power. If the corrugated board abnormally reaches to the CZPT lay, it will harm the CZPT lay and the gripper bar when the CZPT lay reaches to its highest position.
Usually the producers will set up sensors on this element to cease the machine when the paper is fed abnormally to the CZPT lay. However, when the device is working at the high pace, the inertia will provide the machine to operate for a although to make the CZPT lay to its greatest stage and then also injury the CZPT lay and the gripper bar.
Our specific style is that when the abnormal board feeding transpires and being detected, the CZPT lay can by no means reaches to its greatest point which can make free of charge from CZPT lay and gripper bar damages due to the fact of irregular paper feeding.
As it is CZPT special design, so there is no picture to be proven listed here.

  • Optional Delivery Platform:

According to the requirement of the client we can do the delivery system either sq. type or E kind (as revealed in the image) . If the client has enough pallets, he can pick sq. variety. If the consumer does have enough pallet, he can choose, E sort system for which will also provide 4 delivery trolleys.

  • Pneumatic Pre-loading and CZPT ing Stage Device:

The pre-loading device is pneumatic pushed. When a single paper size is established, when you do other pile of pre-loading, there is no hassle of you to reset the pre-loading gadget, you can just push the button and the device will do for you.
The lifting step device is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Very some of the die-chopping device producers use immediate feeding technique which is the operator will feed the board right to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 CZPT s which can make the board feeding work hard and inaccurate.
Our machine makes use of an extra dance roller feeding technique whose board feeding time can be prolong to .6 CZPT . Jointly with the conveying areas it tends to make an easier work of the operator and CZPT er in efficiency of the equipment.
For example:  If an operator operates the direct feeding semi-automatic die-chopping machine at 3300 sheets per hour, he can easily operate CZPT machine at 3700 – 4000 sheets for every hour.
V. Conveying Part:
The board acquired by the dance roller will go by way of a conveying element with belt conveying and belt pressing which helps make the board being pressed just before achieving to the CZPT lay.
Prior to the board reaches to the CZPT lay, he will be repositioned by the aspect lay.
By these approaches, the board conveyed by the dance roller will be much more exact and stable when they reach to the gripper bar.
There is also detector to detect the status of the board. If board does not arrive to the CZPT lay at standard position, the detector will send indicators to quit the equipment.

 

  • Striping Component
    • Striping is fifty percent striping which can strip off a few – edge squander of the board.
    • There are higher chase, middle chase and reduced chase the place the male, elastic block and feminine die are put to strip off the waste.

  • None-quit Feeding and Shipping

This type of device has CZPT patented system – non-end feeding and delivery capabilities which can decrease the operating pressure of the operator and enhance the functioning efficiency of the machine
 
Below this system, the pre-piling is at the aspect of the operator. The pre-piled board can be transported beneath the main pile when the main pile is detected brief of paper.
At the delivery portion, when the board is reduce to be about 1 meter, the equipment will drive the die-minimize board pile out of the machine shipping portion so that it is straightforward for the operator to draw them to the designated spot with out the require of halting the equipment.  

  • Configurations:
Title Manufacturer and Origin Remarks
Bearing SKF Swiss Important part
IKO Japan or HangZhou, CZPT Not important portion
Chain Renold U.K Primary Chain ( Discrepancy of less than .2 mm for per ten chains of machine chain duration)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contractor, buttons TELEMECANIQUE
France
 
Photo CZPT ctric Swap Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Principal CZPT Siemens Joint Enterprise
PLC Delta, ZheJiang  
Guy-device Interface Delta  
Pneumatic Elements Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

 
 

china  sales Automatic Flatbed Die Cutting and Creasing Machine with Waste Stripping (SZ1200P) manufacturers

china best Hand Feeding Automatic Die Cutting and Creasing Machine manufacturers

Product Description

MY Series
 

  1. Requirements:
Product Device MY1200 MY1300 MY1500
Max. Paper Dimensions mm 1200*780 1300*960 1500X1100
Min. Paper Measurement mm 350*350 400*400 500X400
Max. Die-reducing Dimensions mm 1180*760 1280*940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Working Pressure T 300 three hundred 300
Max. Paper Thickness mm one-7 one-seven one-seven
Die-reducing CZPT mm ±0.5 ±0.five ±0.5
Total CZPT KW 15 fifteen 19
Whole CZPT ght KG 11500 13000 16000
All round Dimension mm 5150*4000*2145 5670*4100*2145 6100*4600*2205

 

  1. Features of the machine:

Primary Attributes:

  1. The Bobst sort cut structure helps make the cutting platform motion like a scissor, it will understand a total and simpler cut.
  2. Principal CZPT employs alloy copper material, soon after the experienced operator’s manual scraping treatment and stringent normal tests, it can ensures the driving parts 10 many years existence.
  3. The principal chains undertake imported British Renold brand name, the variations of 10 chains are considerably less than .2mm.
  4. The join among CZPT and driving shaft adopts sleeve and pin composition guaranteeing a powerful link.
    1. Velocity:  

The machine adopts frequency controller to accomplish stepless speed acceleration which can reach to 4500 occasions for every hour. For the duration of genuine creation, it can usually operate at 3600 to 4000 moments per hour in accordance to the high quality of the board. If the good quality of the paper is good, a very good operator even can run the machine at 4200 times for every hours with out feeling also hard.

  1. Basic safety:

As it is shown in the image of the equipment, the machine adopts rear part paper feeding approach which retains the operator absent from the die-chopping component. The mounting and adjustment of the die plate is also carried out outdoors of the die-cutting element with sensors and detectors at die-slicing part to make certain that the equipment can not be started out when the die-chopping plate is at adjustment status.
In addition to the sensors at die-slicing component, there are sensor or strategy switches at window portion to make the entire equipment at checking standing to ensure its basic safety.

  1. Procedure ease:

There is Gentleman-machine interface mounted in the control panel which will shows the basic safety standing of the machine as effectively as malfunctions to facilitate the operator. Digicam is also put in in front of the operator for him/her to keep track of the procedure standing at the delivery element.

  1. Major Constructions and Crucial Substance Used
    1. Four Main Massive Components:

They are referring to: base station, moving system, higher platform and equipment wall. The base station is produced of grey cast iron -HT 200 the moving system is ductile iron – QT 42-10 and the device wall is high quality A3 metal.

  1. Main CZPT :

The 11 KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT types a transferring set to make certain steady pressure out put of not less than 300 tons.
 

The materials for the worm shaft is 40Cr with quenching therapy and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 

The bearing that is employed is CZPT . The bush is copper alloy ZQSn6-6-3.

  1. Die-slicing and Creasing Element:

The push is transferred through crank rod to pendulum which will bring the transferring system to move up and down to attain die-cut and creasing goal.
The pendulum is made of higher good quality ductile iron. The pendulum axis is completed by induction harden with area hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely adhere to the specification of 1080 variety automated die-cutting and creasing machine. When compared with automated die-chopping and creasing device which is used for cardboard die-slicing, this type of semi-automated die-chopping and creasing equipment is primarily used for corrugated board which requirements less strain for die-reducing, in this scenario really some producers have created smaller sized width on the pendulum and scaled-down diameter on the pendulum shaft. We preserve broader pendulum and larger diameter on its shaft to make CZPT equipment very last for a CZPT er lifestyle.                                    
The die-slicing plate employs 7 mm 75 Crl plate which has more hardness and daily life span than the manganese plate.  

  1. Board Conveying:

It adopts 3-cam intermittent positioning system to make sure the boarding conveying accurate and secure.
 
The equipment makes use of gripper bar kind with 12A CZPT joints chain which is considerably less in excess weight and much less shock to the intermittent device beneath the precondition to make certain the toughness of the chain. The brand name of the chain is Renold U.K with high exact and quality. .    
The Gripper bar adopts aviation aluminum with three bridge kind- mild in weight and higher in strength.

  1. Electric powered Element

 

The electrical areas are designed and assembled in accordance to the CZPT pean CE normal and makes use of entire world broad recognized model goods.

  1. Set up of Die

The die mounting and dismounting adopts side withdrawing approaches which time conserving and simple for operation.
There are two methods for the fixation of the die-either by bolt or clippers which are subject to CZPT er’s advice.
The chase locking is pneumatic which is simple, practical and dependable.

  1. Particular People of Our CZPT :
    1. Clever And Specific CZPT Lay Design and style:

In comparison with the card board sheet, the corrugated board has far more toughness. If the corrugated board abnormally reaches to the CZPT lay, it will injury the CZPT lay and the gripper bar when the CZPT lay reaches to its maximum place.
Usually the producers will install sensors on this portion to quit the equipment when the paper is fed abnormally to the CZPT lay. Even so, when the device is working at the substantial velocity, the inertia will deliver the machine to operate for a although to make the CZPT lay to its greatest level and then also damage the CZPT lay and the gripper bar.
Our particular design and style is that when the irregular board feeding occurs and being detected, the CZPT lay can never ever reaches to its highest point which tends to make free of charge from CZPT lay and gripper bar damages since of irregular paper feeding.
As it is CZPT particular design, so there is no photograph to be shown below.

  1. Optional Shipping and delivery System:

According to the requirement of the customer we can do the supply platform either square kind or E kind (as demonstrated in the photograph) . If the client has ample pallets, he can choose square variety. If the consumer does have enough pallet, he can select, E kind platform for which will also offer 4 shipping and delivery trolleys.                     

  1. Pneumatic Preloading and CZPT ing Step Unit:

 
       
The pre-loading system is pneumatic driven. When 1 paper measurement is established, when you do other pile of pre-loading, there is no hassle of you to reset the pre-loading unit, you can just push the button and the equipment will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  1. Dancing Roller Feeding:

Very some of the die-chopping device producers use immediate feeding strategy which is the operator will feed the board directly to the mouth of the gripper. What we have identified that the feeding time to the gripper is only .3 CZPT s which tends to make the board feeding work hard and inaccurate.
Our equipment uses an extra dance roller feeding system whose board feeding time can be increase to .6 CZPT . With each other with the conveying parts it can make an easier operate of the operator and CZPT er in effectiveness of the device.
For example:  If an operator operates the immediate feeding semi-automated die-cutting device at 3300 sheets for each hour, he can easily operate CZPT device at 3700 – 4000 sheets per hour.

  1. Configurations:

 

Title Manufacturer and Origin Remarks
Bearing SKF Swiss Key portion
IKO Japan or HangZhou, CZPT Not essential component
Chain Renold U.K Principal Chain ( Discrepancy of considerably less than .2 mm for for each ten chains of equipment chain size)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Image CZPT ctric Change Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main CZPT Siemens Joint Enterprise
PLC Delta, ZheJiang  
Man-equipment Interface Delta  
Pneumatic Elements Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

 
 
 

china  best Hand Feeding Automatic Die Cutting and Creasing Machine manufacturers

china Cheap Flate Automatic Board Die Cutting Machine Creasing Stripping Machine manufacturers

Product Description

QMY1200P/1300P/1500P CZPT matic Die-slicing and Creasing CZPT (Entrance CZPT Feeding with Stripping Unit)

  • Primary attributes:
  • The Bobst type lower composition helps make the reducing platform movement like a scissor, it will understand a full and less difficult cut.
  • Primary CZPT utilizes alloy copper substance, right after the skilled operator’s guide scraping treatment method and rigorous regular screening, it can assures the driving parts 10 years daily life.
  • The principal chains undertake imported British Renold brand, the variances of ten chains are significantly less than .2mm.
  • The connect amongst CZPT and driving shaft adopts sleeve and pin composition making certain a powerful relationship.
  • Specifications:
Model Device QMY1200P QMY1300P QMY1500P
Max. Paper Size  mm 1200X780 1300X960 1500X1100
Min. Paper Dimension mm 350X350 400X400 500X400
Max. Die-chopping Size mm 1180X760 1280X940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Working Force T three hundred three hundred three hundred
Max. Paper Thickness mm 1-7 1-7 one-7
Die-cutting CZPT mm ±0.five ±0.five ±0.5
Total CZPT KW 32.5kw 32.5 36.5
Total Dimension mm 8600X4000X2350 9100X4250X2345 9600X4700X2400

 
 
 

  • Characteristics of the machine:

Major Attributes:

  • The Bobst sort lower structure helps make the reducing system movement like a scissor, it will recognize a complete and simpler lower.
  • Main CZPT utilizes alloy copper material, right after the skilled operator’s guide scraping therapy and rigid normal testing, it can guarantees the driving areas ten a long time daily life.
  • The primary chains adopt imported British Renold brand, the variations of 10 chains are significantly less than .2mm.
  • The hook up among CZPT and driving shaft adopts sleeve and pin construction making certain a powerful relationship.
    • Pace:  

 
The device adopts frequency controller to accomplish stepless speed acceleration which can attain to 5000 moments per hour. During true manufacturing, it can normally operate at 3600 to 4200 occasions for each hour according to the top quality of the board. If the top quality of the paper is excellent, a good operator even can operate the machine at greatest pace.

  • Security:

 
As it is revealed in the picture of the machine, the equipment adopts rear part paper feeding approach which retains the operator away from the die-cutting element. The mounting and adjustment of the die plate is also carried out exterior of the die-cutting component with sensors and detectors at die-slicing element to make sure that the machine can not be commenced when the die-chopping plate is at adjustment position.
 
Besides the sensors at die-cutting part, there are sensor or method switches at window element to make the entire device at monitoring standing to ensure its safety.
 

  • Procedure convenience:

 
There is Gentleman-device interface installed in the control panel which will demonstrates the basic safety position of the machine as effectively as malfunctions to facilitate the operator. Camera is also put in in front of the operator for him/her to check the operation status at the delivery element.
 
 

  • Principal Structures and Essential Materials Used

 

  • 4 Principal Big Components:

They are: base station, transferring platform, higher system and device wall. The bottom station is manufactured of grey solid iron -HT two hundred the moving system is ductile iron – QT forty two-ten and the machine wall is high quality A3 metal.

  • Main CZPT :

 

 
 
The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT types a transferring set to make sure secure pressure out place which is not considerably less than 300 tons.
 

The content for the worm shaft is 40Cr with quenching remedy and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is utilised is CZPT . The bush is copper alloy ZQSn6-6-3.
 

  • Die-slicing and Creasing Portion:

 
The travel is transferred through crank rod to pendulum which will carry the shifting platform to go up and down to attain die-cut and creasing purpose.
 
The pendulum is manufactured of high top quality ductile iron. The pendulum axis is carried out by induction harden with surface hardness HRC 43-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 type automatic die-cutting and creasing equipment. In comparison with automatic die-chopping and creasing equipment which is utilised for cardboard die-slicing, this variety of automatic die-slicing and creasing device is mainly used for corrugated board which demands much less strain for die-cutting, in this circumstance fairly some producers have made scaled-down width on the pendulum and more compact diameter on the pendulum shaft. We maintain wider pendulum and bigger diameter on its shaft to make CZPT device previous for a CZPT er existence.
 
 
The die-cutting plate utilizes 7 mm 75 Crl plate which has much more hardness and life span than the manganese plate.  
 

  • Board Conveying:

 

 
It adopts 3-cam intermittent positioning gadget to ensure the boarding conveying correct and steady.
The device uses gripper bar type with 12A CZPT joints chain which is less in fat and less shock to the intermittent device under the precondition to ensure the strength of the chain. The manufacturer of the chain is Renold U.K with higher specific and good quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge type- gentle in weight and high in strength.

  • Electric powered Portion

 
 

 
The electrical parts are made and assembled according to the CZPT pean CE common and makes use of world vast recognized manufacturer goods.
 

  • Set up of Die

 
 
 
 
The die mounting and dismounting adopts facet withdrawing approaches which time saving and easy for operation.
There are two approaches for the fixation of the die-both by bolt or clippers which are subject to CZPT er’s tips.
The chase locking is pneumatic which is basic, handy and reliable.
 

  • Specific Characters of Our CZPT :

 

  • Clever And Special CZPT Lay Layout:

 

When compared with the card board sheet, the corrugated board has a lot more toughness. If the corrugated board abnormally reaches to the CZPT lay, it will hurt the CZPT lay and the gripper bar when the CZPT lay reaches to its highest position.
 
Normally the producers will put in sensors on this element to stop the device when the paper is fed abnormally to the CZPT lay. Nonetheless, when the equipment is working at the substantial velocity, the inertia will bring the machine to operate for a even though to make the CZPT lay to its highest level and then also injury the CZPT lay and the gripper bar.
 
Our special layout is that when the irregular board feeding occurs and becoming detected, the CZPT lay can in no way reaches to its maximum point which tends to make cost-free from CZPT lay and gripper bar damages simply because of abnormal paper feeding.
 
As it is CZPT unique design, so there is no photograph to be shown listed here.
 

  • None-cease Accumulating unit

   At the shipping portion, when the board is reduce to be about 1 meter, the device will press
the die-minimize board pile out of the equipment delivery component so that it is straightforward for the operator to attract them to the selected location without having the want of stopping the device .
 
 
 
                    

 

  • Front-guide Feeding Element

   The device adopts patent technology of CZPT -guide feeding composition, which can properly prevent and reduce damages to the surface of printed sheet. Geared up with robust blower, even paper is bending deformation, can feed paper effortlessly.
 
 
 
 
 
 
 
 

 
 

  • Stripping Part  

    (a) The machine is fifty percent striping which can strip off 3 – edge squander and middle holes of the board.
(b) There are higher chase, middle chase and reduce chase where the male, elastic block and
feminine die are put to strip off the squander.
 
 
 
                               
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
              
 

  • Configurations:

 

Identify Model and Origin Remarks
Bearing SKF Swiss Important element
IKO Japan or HangZhou, CZPT Not important component
Chain Renold U.K Primary Chain ( Discrepancy of much less than .2 mm for for each ten chains of device chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo CZPT ctric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Major CZPT Siemens Joint Venture
PLC Delta, ZheJiang  
Gentleman-machine Interface Delta  
Pneumatic Elements Sunrise, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

china  Cheap Flate Automatic Board Die Cutting Machine Creasing Stripping Machine manufacturers

china manufacturer manufacturer wholesaler Manual Feeding Automatic Die Cutting and Creasing Machine Economic Type manufacturers

Solution Description

MY Series
 

  1. Technical specs:
Model Device MY1200 MY1300 MY1five00
Max. Paper Dimension mm 1200*780 1300*960 1500X1100
Min. Paper Dimensions mm 350*350 four hundred*400 500X400
Max. Die-chopping Measurement mm 1180*760 1280*940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Working Pressure T 300 300 300
Max. Paper Thickness mm one-7 1-seven one-7
Die-chopping CZPT mm ±0.five ±0.five ±0.five
Complete CZPT KW 15 fifteen 19
Total CZPT ght KG 11500 13000 16000
Total Dimension mm 5150*4000*2145 5670*4100*2145 6100*4600*2205

 

  1. Characteristics of the device:

Main Functions:

  1. The Bobst kind cut construction tends to make the chopping platform motion like a scissor, it will realize a entire and less difficult cut.
  2. Main CZPT makes use of alloy copper materials, following the seasoned operator’s handbook scraping treatment and rigid normal testing, it can guarantees the driving elements ten several years life.
  3. The primary chains undertake imported British Renold brand, the differences of ten chains are considerably less than .2mm.
  4. The hook up amongst CZPT and driving shaft adopts sleeve and pin composition guaranteeing a strong relationship.
    1. Speed:  

The device adopts frequency controller to accomplish stepless speed acceleration which can reach to 4500 times for every hour. Throughout genuine creation, it can usually operate at 3600 to 4000 instances per hour according to the top quality of the board. If the top quality of the paper is very good, a very good operator even can work the equipment at 4200 moments per hours without experience also difficult.

  1. Safety:

As it is demonstrated in the picture of the machine, the equipment adopts rear portion paper feeding method which keeps the operator away from the die-reducing component. The mounting and adjustment of the die plate is also completed outside the house of the die-slicing element with sensors and detectors at die-cutting component to make sure that the machine can not be commenced when the die-chopping plate is at adjustment position.
Aside from the sensors at die-chopping part, there are sensor or approach switches at window portion to make the entire equipment at monitoring position to guarantee its safety.

  1. Operation comfort:

There is Male-equipment interface set up in the control panel which will demonstrates the safety status of the machine as properly as malfunctions to aid the operator. Digital camera is also installed in front of the operator for him/her to keep an eye on the procedure standing at the delivery part.

  1. Principal Constructions and Crucial Materials Used
    1. Four Major Big Parts:

They are referring to: base station, moving platform, upper system and device wall. The base station is created of gray solid iron -HT 200 the moving platform is ductile iron – QT 42-ten and the equipment wall is high quality A3 metal.

  1. Main CZPT :

The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT varieties a transferring established to ensure secure pressure out set of not much less than three hundred tons.
 

The substance for the worm shaft is 40Cr with quenching remedy and equipment hardness HRC forty five-50. the material for the worm is copper alloy – ZQAL9-4.
 

The bearing that is utilised is CZPT . The bush is copper alloy ZQSn6-6-3.

  1. Die-reducing and Creasing Part:

The generate is transferred through crank rod to pendulum which will bring the transferring system to go up and down to reach die-cut and creasing purpose.
The pendulum is created of higher top quality ductile iron. The pendulum axis is carried out by induction harden with floor hardness HRC forty three-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 sort computerized die-chopping and creasing device. In comparison with automated die-cutting and creasing device which is employed for cardboard die-cutting, this sort of semi-automated die-chopping and creasing machine is primarily used for corrugated board which demands considerably less pressure for die-cutting, in this case fairly some producers have created smaller width on the pendulum and smaller sized diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make CZPT machine previous for a CZPT er lifestyle.                                    
The die-chopping plate employs 7 mm seventy five Crl plate which has a lot more hardness and life span than the manganese plate.  

  1. Board Conveying:

It adopts 3-cam intermittent positioning gadget to ensure the boarding conveying precise and secure.
 
The machine employs gripper bar type with 12A CZPT joints chain which is significantly less in bodyweight and significantly less shock to the intermittent device under the precondition to make sure the strength of the chain. The brand name of the chain is Renold U.K with substantial specific and top quality. .    
The Gripper bar adopts aviation aluminum with three bridge variety- light-weight in excess weight and higher in strength.

  1. Electric powered Element

 

The electrical parts are developed and assembled in accordance to the CZPT pean CE regular and makes use of planet wide recognized brand name items.

  1. Installation of Die

The die mounting and dismounting adopts side withdrawing techniques which time conserving and effortless for operation.
There are two ways for the fixation of the die-both by bolt or clippers which are subject to CZPT er’s advice.
The chase locking is pneumatic which is simple, hassle-free and reliable.

  1. Special Characters of Our CZPT :
    1. Clever And Specific CZPT Lay Design and style:

In comparison with the card board sheet, the corrugated board has far more strength. If the corrugated board abnormally reaches to the CZPT lay, it will harm the CZPT lay and the gripper bar when the CZPT lay reaches to its optimum placement.
Usually the producers will install sensors on this part to stop the equipment when the paper is fed abnormally to the CZPT lay. Nonetheless, when the device is managing at the higher pace, the inertia will bring the machine to operate for a even though to make the CZPT lay to its greatest position and then also damage the CZPT lay and the gripper bar.
Our specific style is that when the abnormal board feeding occurs and getting detected, the CZPT lay can never ever reaches to its optimum stage which makes totally free from CZPT lay and gripper bar damages since of irregular paper feeding.
As it is CZPT unique style, so there is no photo to be revealed here.

  1. Optional Shipping and delivery Platform:

According to the requirement of the client we can do the delivery system both sq. type or E kind (as revealed in the image) . If the shopper has enough pallets, he can pick sq. kind. If the client does have enough pallet, he can pick, E sort platform for which will also provide 4 shipping trolleys.                     

  1. Pneumatic Preloading and CZPT ing Action Device:

 
       
The pre-loading unit is pneumatic pushed. When one particular paper dimensions is established, when you do other pile of pre-loading, there is no bother of you to reset the pre-loading device, you can just press the button and the machine will do for you.
The lifting step device is also pneumatic to facilitate the conveying of the paper pile.

  1. Dancing Roller Feeding:

Quite some of the die-chopping equipment producers use direct feeding technique which is the operator will feed the board directly to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 CZPT s which can make the board feeding work hard and inaccurate.
Our device utilizes an further dance roller feeding technique whose board feeding time can be increase to .6 CZPT . Jointly with the conveying parts it makes an simpler operate of the operator and CZPT er in effectiveness of the equipment.
For instance:  If an operator operates the direct feeding semi-automatic die-chopping equipment at 3300 sheets per hour, he can easily operate CZPT machine at 3700 – 4000 sheets per hour.

  1. Configurations:

 

Title Brand name and Origin Remarks
Bearing SKF Swiss Crucial component
IKO Japan or HangZhou, CZPT Not essential portion
Chain Renold U.K Major Chain ( Discrepancy of considerably less than .2 mm for for every ten chains of device chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Image CZPT ctric Swap Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main CZPT Siemens Joint Venture
PLC Delta, ZheJiang  
Gentleman-equipment Interface Delta  
Pneumatic Elements Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

 
 
 

china  manufacturer  manufacturer  wholesaler Manual Feeding Automatic Die Cutting and Creasing Machine Economic Type manufacturers

china supplier China Automatic Die Cutting and Creasing Machine (SZ1200P) manufacturers

Product Description

Requirements:
 

Product Unit QMY1200P
(SZ1200P)
QMY1300P
(SZ1300P)
QMY1500P
(SZ1500P)
Max. Paper Dimensions mm 1200*780 1300*960 1500*1100
Min. Paper Dimensions mm 350*350 four hundred*410 400*440
Max. Die-slicing Dimensions mm 1180*760 1280*940 1480*1080
Max. CZPT sh/h 5500 5500 4500
Max. Doing work Strain T 300 300 300
Corrugate sheet Thickness mm 1-7 1-seven one-7
Cardboard sheet measurement gsm 250-800 250-800 250-800
Die-slicing CZPT mm ±0.5 ±0.five ±0.5
Whole CZPT KW 22.five 22.5 27.five
Overall CZPT ght kg 14500 15500 19000
General Dimension mm 8000*4000*2250 8750X4100X2245 9400X4600X2245

Attributes of the equipment:
Main Attributes:
The kind reduce framework helps make the slicing system motion like a scissor, it will recognize a total and simpler lower.

Major CZPT uses alloy copper content, right after the skilled operator’s handbook scraping therapy and rigorous normal testing, it can guarantees the driving areas 10 several years life.

The main chains adopt imported British Renold brand name, the distinctions of 10 chains are significantly less than .2mm.

The hook up between CZPT and driving shaft adopts sleeve and pin construction making certain a sturdy connection.

Speed:  
The device adopts frequency controller to accomplish stepless velocity acceleration which can achieve to 4500 moments for each hour. Throughout real generation, it can generally run at 3600 to 4200 moments per hour according to the top quality of the board. If the top quality of the paper is good, a great operator even can work the device at optimum speed.

Safety:
As it is revealed in the photo of the machine, the machine adopts  automatic paper feeding technique which retains the operator away from the die-reducing portion. The mounting and adjustment of the die plate is also carried out outside the house of the die-cutting element with sensors and detectors at die-slicing part to make sure that the machine can not be began when the die-slicing plate is at adjustment status.
 
Aside from the sensors at die-reducing portion, there are sensor or approach switches at window element to make the entire machine at monitoring standing to make certain its security.
 
Operation comfort:

There is Man-device interface set up in the control panel which will shows the safety status of the equipment as properly as malfunctions to facilitate the operator. Camera is also put in in CZPT of the operator for him/her to monitor the procedure status at the delivery component.
Principal Structures and Important Material Used
 
Four Primary Big Areas:
They are: base station, moving system, upper platform and equipment wall. The bottom station is produced of gray forged iron -HT two hundred the transferring system is ductile iron – QT 42-10 and the machine wall is large top quality A3 metal.
Main CZPT :

The 11 KW CZPT CZPT with each other with the pneumatic clutch, worm shaft and CZPT types a relocating established to guarantee stable strain out place of not significantly less than three hundred tons.
 
The materials for the worm shaft is 40Cr with quenching treatment method and equipment hardness HRC forty five-50. the substance for the worm is copper alloy – ZQAL9-4.
 
The bearing that is used is CZPT . The bush is copper alloy ZQSn6-6-3.
 
Die-slicing and Creasing Portion:
 
The generate is transferred by way of crank rod to pendulum which will carry the moving platform to go up and down to attain die-minimize and creasing function.
 
The pendulum is made of higher quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – fully stick to the specification of 1080 type computerized die-reducing and creasing machine. In comparison with computerized die-cutting and creasing machine which is utilised for cardboard die-cutting, this variety of automatic die-reducing and creasing device is largely utilized for corrugated board which wants much less force for die-reducing, in this circumstance quite some producers have produced more compact width on the pendulum and smaller sized diameter on the pendulum shaft. We maintain broader pendulum and even bigger diameter on its shaft to make CZPT equipment previous for a CZPT er life.
The die-reducing plate makes use of 7 mm seventy five Crl plate which has more hardness and existence span than the manganese plate.  
Board Conveying:
 

It adopts 3-cam intermittent positioning gadget to guarantee the boarding conveying exact and steady.
 
The device utilizes gripper bar sort with 12A CZPT joints chain which is considerably less in weight and considerably less shock to the intermittent gadget below the precondition to ensure the energy of the chain. The manufacturer of the chain is Renold U.K with substantial specific and top quality. .    
The Gripper bar adopts aviation aluminum with three bridge kind- mild in bodyweight and substantial in strength.
 
Electric Part
 
The electrical elements are made and assembled in accordance to the CZPT pean CE standard and makes use of entire world broad known brand products.
 
Set up of Die
The die mounting and dismounting adopts facet withdrawing approaches which time preserving and straightforward for procedure.
There are two techniques for the fixation of the die-both by bolt or clippers which are matter to CZPT er’s tips.
 
The chase locking is pneumatic which is basic, hassle-free and trustworthy.
 
Special Characters of Our CZPT :
 
Intelligent And Specific CZPT Lay Layout:
 
Compared with the card board sheet, the corrugated board has far more strength. If the corrugated board abnormally reaches to the CZPT lay, it will injury the CZPT lay and the gripper bar when the CZPT lay reaches to its highest position.
 
Generally the producers will install sensors on this portion to end the machine when the paper is fed abnormally to the CZPT lay. However, when the device is managing at the substantial velocity, the inertia will deliver the device to run for a while to make the CZPT lay to its greatest stage and then also injury the CZPT lay and the gripper bar.
 
Our unique design and style is that when the abnormal board feeding happens and getting detected, the CZPT lay can never ever reaches to its highest level which tends to make totally free from CZPT lay and gripper bar damages due to the fact of irregular paper feeding.
 
As it is CZPT unique style, so there is no image to be demonstrated listed here.
 
Automobile-Guide Switching Program
The Feeding technique for this type of machine can do auto and manual. When the sheet form is very good, you can use car-perform. When the form of the sheet is not good, you can use manual purpose and do sheet feeding manually.  
 
When the sheet is not great in condition, you can open up the rear beam and carry up the feeder to do guide feeding.  
 
Stripping Component  
  (a) The device is 50 percent striping which can strip off a few – edge waste and middle holes of the board.
 (b) There are higher chase, center chase and decrease chase exactly where the male, elastic block and
female die are positioned to strip off the squander.
 
                            
Configurations:
 

Identify Manufacturer and Origin Remarks
Bearing SKF Swiss Key component
IKO Japan or HangZhou, CZPT Not key part
Chain Renold U.K Primary Chain ( Discrepancy of considerably less than .2 mm for per 10 chains of equipment chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo CZPT ctric Change Fotek ZheJiang  
Stabilizer MEANWELL ZheJiang  
Variator Delta ZheJiang  
Major CZPT Siemens Joint Enterprise
PLC Delta, ZheJiang  
Male-machine Interface Delta  
Pneumatic Elements Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and supply CPG ZheJiang  

 
Tools Kit
 

Name Volume Specification
Minus CZPT CZPT r 1 150
In addition CZPT driver 1 a hundred and fifty
Monkey Wrench 1 three hundred
Interior hexagon Spanner 1 set 1.522.534568101214
Greasing Gun 1  
Oil Gun one  
Wrench A single established 12,fourteen/13,sixteen
Vise one  
Triangular File 1  

 

 
 

china  supplier China Automatic Die Cutting and Creasing Machine (SZ1200P) manufacturers

china wholesaler High Speed Semi Automatic Die Cutting and Creasing Machine My1500e manufacturers

Product Description

 
MY E Collection Semi computerized die-cutting and creasing equipment

  1. Specs:
Model Unit MY1two00E MY1300E MY1500E
Max. Paper Size  mm 1200X780 1300*960 1500X1100
Min. Paper Dimension mm 350X350 400*410 500X410
Max. Die-reducing Dimension mm 1180X760 1280*940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Working Strain T three hundred three hundred three hundred
Max. Paper Thickness mm one-seven 1-7 one-7
Die-reducing CZPT mm ±0.5 ±0.5 ±0.5
Total CZPT KW 15 fifteen 19
Complete CZPT ght T 12500 14000 17000
Total Dimension mm 6730*4000*2145 7250*4100*2145 7700*4600*2205
  1. Attributes of the device:

Principal Functions:

  1. The Bobst variety minimize framework makes the slicing system movement like a scissor, it will comprehend a total and less difficult cut.
  2. Principal CZPT makes use of alloy copper material, right after the seasoned operator’s manual scraping treatment method and rigorous standard testing, it can guarantees the driving parts 10 many years lifestyle.
  3. The primary chains undertake imported British Renold brand name, the distinctions of ten chains are less than .2mm.
  4. The link among CZPT and driving shaft adopts sleeve and pin framework guaranteeing a strong relationship.
    1. Pace:  

The device adopts frequency controller to accomplish stepless speed acceleration which can achieve to 4500 moments per hour. In the course of actual creation, it can typically run at 3600 to 4000 instances for every hour in accordance to the top quality of the board. If the top quality of the paper is very good, a very good operator even can operate the machine at 4200 occasions for every several hours without emotion way too hard.
 

  1. Protection:

As it is demonstrated in the picture of the equipment, the device adopts rear part paper feeding approach which retains the operator absent from the die-chopping element. The mounting and adjustment of the die plate is also completed exterior of the die-cutting portion with sensors and detectors at die-cutting part to make sure that the device can not be started when the die-reducing plate is at adjustment status.
Apart from the sensors at die-cutting component, there are sensor or technique switches at window component to make the entire equipment at checking status to ensure its security.

  1. Procedure ease:

There is Man-equipment interface put in in the control panel which will shows the basic safety position of the machine as effectively as malfunctions to facilitate the operator. Digital camera is also installed in front of the operator for him/her to keep an eye on the operation standing at the supply part.

  1. Primary Constructions and Essential Content Utilised
    1. Four Major Massive Areas:

They are referring to: base station, moving system, upper platform and device wall. The base station is created of gray solid iron -HT 200 the moving system is ductile iron – QT 42-ten and the device wall is high quality A3 metal.

  1. Main CZPT :

The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT forms a shifting established to guarantee stable pressure out set of not much less than three hundred tons.

 
The substance for the worm shaft is 40Cr with quenching treatment method and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is CZPT . The bush is copper alloy ZQSn6-6-3.

  1. Die-slicing and Creasing Portion:

The travel is transferred by way of crank rod to pendulum which will carry the relocating system to move up and down to achieve die-lower and creasing purpose.
The pendulum is produced of high high quality ductile iron. The pendulum axis is carried out by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely adhere to the specification of 1080 variety automatic die-slicing and creasing machine. Compared with automated die-slicing and creasing equipment which is used for cardboard die-reducing, this variety of semi-computerized die-chopping and creasing equipment is mainly used for corrugated board which wants less pressure for die-cutting, in this situation very some producers have created smaller width on the pendulum and smaller diameter on the pendulum shaft. We maintain wider pendulum and bigger diameter on its shaft to make CZPT equipment final for a CZPT er lifestyle.
 
 
The die-slicing plate utilizes 7 mm seventy five Crl plate which has far more hardness and lifestyle span than the manganese plate.  

  1. Board Conveying:

It adopts 3-cam intermittent positioning unit to make certain the boarding conveying correct and secure.
The device employs gripper bar type with 12A CZPT joints chain which is much less in bodyweight and considerably less shock to the intermittent device under the precondition to guarantee the energy of the chain. The model of the chain is Remold U.K with large specific and good quality. .    
The Gripper bar adopts aviation aluminum with three bridge sort- light-weight in bodyweight and large in energy.

  1. Electric Part

The electrical components are designed and assembled in accordance to the CZPT pean CE regular and makes use of globe extensive acknowledged manufacturer products.

  1. Set up of Die

The die mounting and dismounting adopts facet withdrawing ways which time conserving and effortless for operation.
There are two methods for the fixation of the die-either by bolt or clippers which are subject to CZPT er’s advice.
The chase locking is pneumatic which is simple, practical and trustworthy.

  1. Particular People of Our CZPT :
    1. Clever And Particular CZPT Lay Design and style:

When compared with the card board sheet, the corrugated board has more energy. If the corrugated board abnormally reaches to the CZPT lay, it will damage the CZPT lay and the gripper bar when the CZPT lay reaches to its highest position.
Normally the producers will set up sensors on this element to quit the machine when the paper is fed abnormally to the CZPT lay. Nevertheless, when the equipment is managing at the large pace, the inertia will provide the machine to operate for a while to make the CZPT lay to its highest stage and then also damage the CZPT lay and the gripper bar.
Our unique layout is that when the irregular board feeding occurs and getting detected, the CZPT lay can never ever reaches to its highest position which can make free from CZPT lay and gripper bar damages since of irregular paper feeding.
As it is CZPT unique style, so there is no picture to be demonstrated here.

  1. Optional Shipping and delivery Platform:

According to the requirement of the client we can do the delivery system both square variety or E sort (as shown in the photo) . If the consumer has ample pallets, he can decide on sq. type. If the client does have enough pallet, he can select, E variety system for which will also offer 4 supply trolleys.      

  1. Pneumatic Preloading and CZPT ing Stage Device:

The preloading device is pneumatic pushed. When one paper dimensions is established, when you do other pile of preloading, there is no bother of you to reset the preloading unit, you can just press the button and the device will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  1. Dancing Roller Feeding:

Very some of the die-cutting machine producers use direct feeding method which is the operator will feed the board directly to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 CZPT s which can make the board feeding work hard and inaccurate.
 
Our machine uses an further dance roller feeding system whose board feeding time can be prolong to .6 CZPT . Together with the conveying components it makes an easier operate of the operator and CZPT er in effectiveness of the device.
For case in point:  If an operator operates the immediate feeding semi-automatic die-chopping equipment at 3300 sheets per hour, he can easily operate CZPT machine at 3700 – 4000 sheets for each hour.

  1. Conveying Element:

The board obtained by the dance roller will go through a conveying portion with belt conveying and belt pressing which makes the board becoming pressed ahead of reaching to the CZPT lay.
Before the board reaches to the CZPT lay, he will be repositioned by the facet lay.
By these ways, the board conveyed by the dance roller will be much more exact and stable when they reach to the gripper bar.
There is also detector to detect the position of the board. If board does not come to the CZPT lay at regular placement, the detector will send indicators to stop the device.

  1. Configurations:
Identify Brand and Origin Remarks
Bearing SKF Swiss Essential element
IKO Japan or HangZhou, CZPT Not important element
Chain Renold U.K Main Chain ( Discrepancy of considerably less than .2 mm for for every ten chains of equipment chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Picture CZPT ctric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main CZPT Siemens Joint Venture
PLC Delta, ZheJiang  
Male-machine Interface Delta  
Pneumatic Areas Sunrise, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and supply CPG ZheJiang  

 
 

china  wholesaler High Speed Semi Automatic Die Cutting and Creasing Machine My1500e manufacturers

china Custom Automatic Carton Box Die Cutting Machine with Waste Stripping (QMY1300P) manufacturers

Item Description

QMY1200P/1300P/1500P CZPT matic Die-reducing and Creasing CZPT (Front CZPT Feeding with Stripping Device)

1. Technical specs: 
 

Model Unit QMY1200P QMY1300P QMY1500P
Max. Paper Size  mm 1200X780 1300X960 1500X1100
Min. Paper Dimension mm 400X410 400X410 540X400
Max. Die-reducing Dimensions mm 1180X760 1280X940 1480X1080
Max. Speed sh/h -5500 -5500 -4500
Max. Working Strain T 300 three hundred three hundred
Max. Paper Thickness mm 1-7 one-seven 1-7
Die-reducing CZPT mm ±0.five ±0.five ±0.five
Whole CZPT KW 32.5 32.5 36.five
Overall Dimension mm 8600X4230X2350 9100X4530X2345 9600X4795X2400

2. Major Characteristics:
one) The reduce framework tends to make the cutting system motion like a scissor, it will understand a total and less difficult reduce.
two) Major CZPT employs alloy copper material, right after the experienced operator’s guide scraping treatment and rigorous standard screening, it can assures the driving components ten several years lifestyle.
three) The primary chains adopt imported British Renold brand, the distinctions of ten chains are significantly less than .2mm.
4) The connect amongst CZPT and driving shaft adopts sleeve and pin structure making sure a powerful link.
aPace:   
 The equipment adopts frequency controller to achieve stepless velocity acceleration which can attain to 5000 times per hour. In the course of actual manufacturing, it can typically operate at 3600 to 4200 times for each hour according to the quality of the board. If the high quality of the paper is good, a very good operator even can operate the machine at highest speed.
b. Safety:  
As it is proven in the photo of the device, the machine adopts rear part paper feeding approach which retains the operator away from the die-reducing component. The mounting and adjustment of the die plate is also completed outside of the die-cutting portion with sensors and detectors at die-reducing part to ensure that the equipment can not be commenced when the die-reducing plate is at adjustment status.
 
Apart from the sensors at die-chopping portion, there are sensor or method switches at window component to make the whole equipment at checking standing to make sure its basic safety.

c. Operation comfort: 
There is Man-device interface set up in the control panel which will demonstrates the security status of the machine as effectively as malfunctions to aid the operator. Digicam is also mounted in front of the operator for him/her to keep an eye on the procedure status at the shipping component.
 
d. Principal Buildings and Key Materials Used
1) Four Principal Huge Parts: They are: base station, shifting system, upper platform and equipment wall. The bottom station is produced of grey cast iron -HT two hundred the transferring platform is ductile iron – QT forty two-ten and the device wall is high quality A3 steel.
two) Main CZPT : 
 

The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT kinds a transferring established to guarantee stable pressure out place which is not significantly less than 300 tons.
 
The content for the worm shaft is 40Cr with quenching therapy and equipment hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is utilised is CZPT . The bush is copper alloy ZQSn6-6-3.

e. Die-slicing and Creasing Portion:  
The drive is transferred by means of crank rod to pendulum which will bring the shifting system to move up and down to attain die-cut and creasing objective.
 
The pendulum is produced of substantial quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC forty three-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type computerized die-reducing and creasing device. In contrast with automated die-chopping and creasing machine which is used for cardboard die-chopping, this sort of automated die-reducing and creasing machine is mostly used for corrugated board which demands significantly less stress for die-reducing, in this circumstance really some producers have created smaller sized width on the pendulum and scaled-down diameter on the pendulum shaft. We keep wider pendulum and larger diameter on its shaft to make CZPT device previous for a CZPT er existence.
 
 

The die-chopping plate makes use of 7 mm 75 Crl plate which has far more hardness and lifestyle span than the manganese plate.  

f. Board Conveying:  

 
It adopts 3-cam intermittent positioning unit to guarantee the boarding conveying exact and stable.

The device uses gripper bar sort with 12A CZPT joints chain which is less in fat and significantly less shock to the intermittent device below the precondition to make sure the toughness of the chain. The model of the chain is Renold U.K with large exact and quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge kind- light-weight in fat and higher in toughness.

g. Electric powered Portion  
 
 
The electrical areas are designed and assembled according to the CZPT pean CE regular and employs planet wide acknowledged model goods.

h. Installation of Die  
 
 

 
The die mounting and dismounting adopts aspect withdrawing methods which time preserving and straightforward for operation.
There are two methods for the fixation of the die-both by bolt or clippers which are subject to CZPT er’s advice.

The chase locking is pneumatic which is basic, convenient and dependable.

i. Unique Figures of Our CZPT :
Clever And Particular CZPT Lay Style:  

In contrast with the card board sheet, the corrugated board has more toughness. If the corrugated board abnormally reaches to the CZPT lay, it will injury the CZPT lay and the gripper bar when the CZPT lay reaches to its greatest situation.
 
Usually the producers will set up sensors on this element to quit the machine when the paper is fed abnormally to the CZPT lay. Nonetheless, when the machine is operating at the high pace, the inertia will deliver the machine to run for a while to make the CZPT lay to its greatest position and then also injury the CZPT lay and the gripper bar.
 
Our specific design and style is that when the abnormal board feeding occurs and getting detected, the CZPT lay can by no means reaches to its greatest position which tends to make cost-free from CZPT lay and gripper bar damages since of irregular paper feeding.
 
As it is CZPT unique design and style, so there is no picture to be revealed below.

j. CZPT e-end Amassing device   
At the shipping portion, when the board is cut to be about 1 meter, the device will drive
the die-minimize board pile out of the device supply portion so that it is effortless for the operator to attract them to the selected place with out the want of stopping the device .
 
 
 
                    
Paper pallet

k. CZPT -lead Feeding Portion   The device adopts patent technology of CZPT -direct feeding structure, which can successfully prevent and minimize damages to the surface of printed sheet. Equipped with sturdy blower, even paper is bending deformation, can feed paper effortlessly.

  • Stripping Part  

a)The equipment is half striping which can strip off a few – edge squander and middle holes of the board.
b) There are upper chase, center chase and decrease chase exactly where the male, elastic block and
feminine die are put to strip off the squander.
                               

Higher chase                             Middle chase                Upper chase             
3. Configurations:

Name Model and Origin Remarks
Bearing SKF Swiss Essential part
IKO Japan or HangZhou, CZPT Not crucial part
Chain Renold U.K Main Chain ( Discrepancy of considerably less than .2 mm for for every 10 chains of equipment chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Image CZPT ctric Swap Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Principal CZPT Siemens Joint Venture
PLC Delta, ZheJiang  
Guy-device Interface Delta  
Pneumatic Components Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

china  Custom Automatic Carton Box Die Cutting Machine with Waste Stripping (QMY1300P) manufacturers

china wholesaler Front Lead Feeding Automatic Die Cutting and Creasing Machine (QMY1300P) manufacturers

Item Description

QMY1200P/1300P/1500P CZPT matic Die-slicing and Creasing CZPT (Entrance CZPT Feeding with Stripping Unit)

1. Requirements: 
 

Product Unit QMY1200P QMY1300P QMY1500P
Max. Paper Size  mm 1200X780 1300X960 1500X1100
Min. Paper Measurement mm 400X410 400X410 540X400
Max. Die-slicing Size mm 1180X760 1280X940 1480X1080
Max. Speed sh/h -5500 -5500 -4500
Max. Working Force T three hundred 300 three hundred
Max. Paper Thickness mm 1-seven 1-7 1-7
Die-chopping CZPT mm ±0.5 ±0.five ±0.five
Total CZPT KW 32.5 32.5 36.five
General Dimension mm 8600X4230X2350 9100X4530X2345 9600X4795X2400

two. Primary Attributes:
one) The minimize structure can make the reducing system motion like a scissor, it will recognize a entire and less difficult cut.
2) Primary CZPT employs alloy copper content, following the seasoned operator’s manual scraping treatment and stringent regular tests, it can assures the driving elements ten many years existence.
three) The principal chains adopt imported British Renold manufacturer, the variations of 10 chains are much less than .2mm.
four) The connect among CZPT and driving shaft adopts sleeve and pin framework making sure a sturdy relationship.
aPace:   
 The machine adopts frequency controller to attain stepless velocity acceleration which can reach to 5000 times per hour. During actual creation, it can usually operate at 3600 to 4200 moments for every hour according to the high quality of the board. If the quality of the paper is very good, a great operator even can operate the machine at greatest velocity.
b. Safety:  
As it is shown in the picture of the equipment, the machine adopts rear component paper feeding method which retains the operator absent from the die-reducing element. The mounting and adjustment of the die plate is also accomplished outdoors of the die-reducing portion with sensors and detectors at die-reducing component to guarantee that the machine can not be commenced when the die-slicing plate is at adjustment position.
 
In addition to the sensors at die-reducing component, there are sensor or method switches at window component to make the entire equipment at checking status to make certain its security.

c. Procedure ease: 
There is Male-equipment interface mounted in the control panel which will demonstrates the safety standing of the machine as well as malfunctions to aid the operator. Camera is also installed in front of the operator for him/her to check the procedure status at the supply part.
 
d. Principal Structures and Essential Substance Utilized
one) Four Main Huge Elements: They are: bottom station, moving platform, upper platform and equipment wall. The bottom station is produced of gray forged iron -HT two hundred the transferring platform is ductile iron – QT forty two-10 and the machine wall is high quality A3 metal.
two) Main CZPT : 
 

The 11 KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT forms a moving established to make certain steady pressure out put which is not significantly less than three hundred tons.
 
The content for the worm shaft is 40Cr with quenching treatment method and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is utilized is CZPT . The bush is copper alloy ZQSn6-6-3.

e. Die-slicing and Creasing Element:  
The push is transferred by way of crank rod to pendulum which will bring the transferring system to go up and down to reach die-reduce and creasing objective.
 
The pendulum is produced of higher high quality ductile iron. The pendulum axis is completed by induction harden with surface hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 variety computerized die-reducing and creasing equipment. When compared with automated die-chopping and creasing machine which is employed for cardboard die-cutting, this type of computerized die-chopping and creasing equipment is mainly utilised for corrugated board which requirements much less stress for die-chopping, in this case very some producers have created smaller sized width on the pendulum and scaled-down diameter on the pendulum shaft. We keep broader pendulum and even bigger diameter on its shaft to make CZPT equipment last for a CZPT er existence.
 
 

The die-chopping plate uses 7 mm 75 Crl plate which has a lot more hardness and existence span than the manganese plate.  

f. Board Conveying:  

 
It adopts 3-cam intermittent positioning gadget to ensure the boarding conveying precise and steady.

The equipment uses gripper bar kind with 12A CZPT joints chain which is considerably less in bodyweight and significantly less shock to the intermittent device underneath the precondition to make sure the strength of the chain. The model of the chain is Renold U.K with large exact and top quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge variety- light-weight in weight and substantial in toughness.

g. Electrical Component  
 
 
The electrical parts are created and assembled according to the CZPT pean CE regular and uses entire world broad recognized model products.

h. Set up of Die  
 
 

 
The die mounting and dismounting adopts facet withdrawing ways which time preserving and straightforward for operation.
There are two methods for the fixation of the die-either by bolt or clippers which are subject to CZPT er’s tips.

The chase locking is pneumatic which is basic, practical and trustworthy.

i. Special People of Our CZPT :
Clever And Specific CZPT Lay Design:  

Compared with the card board sheet, the corrugated board has far more power. If the corrugated board abnormally reaches to the CZPT lay, it will injury the CZPT lay and the gripper bar when the CZPT lay reaches to its highest placement.
 
Normally the producers will set up sensors on this portion to stop the equipment when the paper is fed abnormally to the CZPT lay. Nevertheless, when the machine is managing at the large speed, the inertia will deliver the machine to operate for a even though to make the CZPT lay to its maximum position and then also damage the CZPT lay and the gripper bar.
 
Our particular style is that when the irregular board feeding takes place and being detected, the CZPT lay can in no way reaches to its highest level which helps make cost-free from CZPT lay and gripper bar damages because of irregular paper feeding.
 
As it is CZPT special design and style, so there is no photo to be shown here.

j. CZPT e-end Amassing unit   
At the supply part, when the board is minimize to be about 1 meter, the equipment will push
the die-lower board pile out of the equipment shipping and delivery component so that it is simple for the operator to attract them to the designated place without having the want of stopping the equipment .
 
 
 
                    
Paper pallet

k. CZPT -direct Feeding Component   The device adopts patent technologies of CZPT -guide feeding construction, which can effectively prevent and minimize damages to the surface area of printed sheet. Geared up with powerful blower, even paper is bending deformation, can feed paper efficiently.

  • Stripping Portion  

a)The device is half striping which can strip off 3 – edge waste and center holes of the board.
b) There are upper chase, center chase and lower chase the place the male, elastic block and
feminine die are positioned to strip off the squander.
                               

Higher chase                             Middle chase                Higher chase             
three. Configurations:

Identify Manufacturer and Origin Remarks
Bearing SKF Swiss Essential component
IKO Japan or HangZhou, CZPT Not crucial element
Chain Renold U.K Principal Chain ( Discrepancy of considerably less than .2 mm for per ten chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Image CZPT ctric Change Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Major CZPT Siemens Joint Enterprise
PLC Delta, ZheJiang  
Man-device Interface Delta  
Pneumatic Parts Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and supply CPG ZheJiang  

china  wholesaler Front Lead Feeding Automatic Die Cutting and Creasing Machine (QMY1300P) manufacturers

china near me Semi Automatic Die Cutting and Creasing Machine My1500 manufacturers

Solution Description

MY Series Semi computerized die cutting and creasing machine

  1. Specifications:
Model Unit MY1200 MY1300 MY1five00
Max. Paper Measurement mm 1200*780 1300*960 1500X1100
Min. Paper Measurement mm 350*350 400*400 500X400
Max. Die-slicing Size mm 1180*760 1280*940 1480X1080
Max. Speed sh/h -5000 -4600 -4000
Max. Working Force T 300 three hundred 300
Max. Paper Thickness mm 1-7 one-7 one-7
Die-chopping CZPT mm ±0.5 ±0.five ±0.five
Total CZPT KW fifteen fifteen 19
Overall CZPT ght KG 11500 13000 16000
General Dimension mm 5150*4000*2145 5670*4100*2145 6100*4600*2205

 

  1. Attributes of the device:

Main Features:

  1. The Bobst type minimize construction helps make the chopping platform movement like a scissor, it will comprehend a entire and less difficult reduce.
  2. Main CZPT makes use of alloy copper material, after the seasoned operator’s guide scraping therapy and strict standard tests, it can guarantees the driving elements 10 a long time life.
  3. The primary chains undertake imported British Renold manufacturer, the variances of 10 chains are much less than .2mm.
  4. The link among CZPT and driving shaft adopts sleeve and pin composition guaranteeing a robust link.
    1. Pace:  

The equipment adopts frequency controller to obtain stepless pace acceleration which can get to to 4500 times per hour. Throughout genuine creation, it can typically run at 3600 to 4000 times for each hour according to the quality of the board. If the quality of the paper is good, a excellent operator even can run the machine at 4200 occasions for each hours without having sensation also tough.

  1. Basic safety:

As it is proven in the photograph of the equipment, the device adopts rear portion paper feeding technique which keeps the operator away from the die-chopping part. The mounting and adjustment of the die plate is also carried out exterior of the die-reducing element with sensors and detectors at die-reducing element to ensure that the equipment can not be started out when the die-chopping plate is at adjustment standing.
Aside from the sensors at die-slicing part, there are sensor or strategy switches at window portion to make the entire equipment at monitoring status to make certain its safety.

  1. Procedure convenience:

There is Guy-machine interface set up in the control panel which will demonstrates the security position of the machine as effectively as malfunctions to aid the operator. Digicam is also mounted in front of the operator for him/her to keep track of the procedure standing at the shipping and delivery portion.

  1. Major Constructions and Essential Material Utilised
    1. Four Main Large Components:

They are referring to: base station, relocating platform, higher system and machine wall. The bottom station is manufactured of gray solid iron -HT two hundred the relocating system is ductile iron – QT forty two-10 and the machine wall is high quality A3 steel.

  1. Main CZPT :

The eleven KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT varieties a shifting set to make certain steady pressure out put of not significantly less than three hundred tons.

 
The material for the worm shaft is 40Cr with quenching remedy and gear hardness HRC 45-fifty. the material for the worm is copper alloy – ZQAL9-4.

 
The bearing that is utilised is CZPT . The bush is copper alloy ZQSn6-6-3.

  1. Die-cutting and Creasing Portion:

The push is transferred through crank rod to pendulum which will deliver the moving platform to transfer up and down to get to die-cut and creasing goal.
The pendulum is made of high good quality ductile iron. The pendulum axis is completed by induction harden with surface hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 sort automated die-slicing and creasing machine. In contrast with computerized die-slicing and creasing device which is utilised for cardboard die-reducing, this kind of semi-automated die-reducing and creasing machine is largely employed for corrugated board which demands considerably less stress for die-cutting, in this scenario quite some producers have manufactured scaled-down width on the pendulum and smaller diameter on the pendulum shaft. We hold broader pendulum and bigger diameter on its shaft to make CZPT device very last for a CZPT er existence.                                    
The die-slicing plate uses 7 mm seventy five Crl plate which has far more hardness and existence span than the manganese plate.  

  1. Board Conveying:

It adopts 3-cam intermittent positioning unit to make certain the boarding conveying accurate and stable.
 
The equipment makes use of gripper bar type with 12A CZPT joints chain which is significantly less in bodyweight and much less shock to the intermittent device underneath the precondition to make sure the strength of the chain. The brand name of the chain is Renold U.K with large exact and good quality. .    
The Gripper bar adopts aviation aluminum with three bridge kind- gentle in bodyweight and substantial in energy.

  1. Electric Component

The electrical components are designed and assembled in accordance to the CZPT pean CE regular and employs planet extensive known manufacturer items.

  1. Installation of Die

The die mounting and dismounting adopts facet withdrawing techniques which time saving and effortless for procedure.
There are two methods for the fixation of the die-either by bolt or clippers which are subject to CZPT er’s suggestions.
The chase locking is pneumatic which is easy, practical and dependable.

  1. Unique Characters of Our CZPT :
    1. Clever And Particular CZPT Lay Design and style:

Compared with the card board sheet, the corrugated board has more energy. If the corrugated board abnormally reaches to the CZPT lay, it will damage the CZPT lay and the gripper bar when the CZPT lay reaches to its greatest placement.
Generally the producers will set up sensors on this element to stop the device when the paper is fed abnormally to the CZPT lay. However, when the device is managing at the large pace, the inertia will provide the machine to run for a although to make the CZPT lay to its optimum point and then also injury the CZPT lay and the gripper bar.
Our specific design is that when the abnormal board feeding occurs and becoming detected, the CZPT lay can never reaches to its greatest level which makes free of charge from CZPT lay and gripper bar damages because of abnormal paper feeding.
As it is CZPT unique layout, so there is no photograph to be revealed listed here.

  1. Optional Supply Platform:

In accordance to the requirement of the customer we can do the shipping and delivery platform both square sort or E variety (as revealed in the image) . If the shopper has adequate pallets, he can select square type. If the customer does have enough pallet, he can choose, E sort system for which will also provide 4 shipping and delivery trolleys.                     

  1. Pneumatic Preloading and CZPT ing Step Unit:

The pre-loading gadget is pneumatic driven. When a single paper dimension is established, when you do other pile of pre-loading, there is no bother of you to reset the pre-loading system, you can just press the button and the device will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  1. Dancing Roller Feeding:

Fairly some of the die-chopping device producers use direct feeding strategy which is the operator will feed the board immediately to the mouth of the gripper. What we have located that the feeding time to the gripper is only .3 CZPT s which helps make the board feeding work hard and inaccurate.
Our device makes use of an further dance roller feeding method whose board feeding time can be lengthen to .6 CZPT . With each other with the conveying elements it helps make an simpler function of the operator and CZPT er in effectiveness of the equipment.
For case in point:  If an operator operates the direct feeding semi-automated die-chopping device at 3300 sheets for every hour, he can easily operate CZPT machine at 3700 – 4000 sheets for every hour.

  1. Configurations:

 

Title Brand and Origin Remarks
Bearing SKF Swiss Essential element
IKO Japan or HangZhou, CZPT Not key component
Chain Renold U.K Major Chain ( Discrepancy of much less than .2 mm for for every ten chains of equipment chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo CZPT ctric Change Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main CZPT Siemens Joint Undertaking
PLC Delta, ZheJiang  
Guy-machine Interface Delta  
Pneumatic Areas Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping and delivery CPG ZheJiang  

 
 
 

china  near me Semi Automatic Die Cutting and Creasing Machine My1500 manufacturers

china sales Automatic Platen Die Cutting and Creasing Machine with High Speed (QMY1300) manufacturers

Item Description

QMY1200/1300/1500 CZPT matic die reducing and creasing equipment(front lead feeding)

  • Technical specs:
Design Device QMYone hundred twenty QMYa hundred thirty QMYa hundred and fifty
Max. Paper Size  mm 1200*780 1300*960 1500*1100
Min. Paper Measurement mm four hundred*410 400*410 540*410
Max. Die-reducing Dimension mm 1180*760 1280*940 1480*1080
Max. Speed sh/h -5500 -5500 -4500
Max. Working Strain T 300 three hundred 300
Max. Paper Thickness mm one-7 one-7 1-7
Die-slicing CZPT mm ±0.5 ±0.5 ±0.5
Total CZPT KW 32.5 32.5 36.five
Whole CZPT ght T 19000 20500 24000
All round Dimension mm 7600*4230*2350 8100*4530*2245 8600*4795*2400

 
 

  • . Features of the machine:

Primary Functions:

  • The lower framework can make the reducing system motion like a scissor, it will realize a total and simpler reduce.
  • Primary CZPT utilizes alloy copper content, following the knowledgeable operator’s manual scraping remedy and rigorous standard testing, it can ensures the driving elements 10 years life.
  • The principal chains adopt imported British Renold model, the distinctions of 10 chains are considerably less than .2mm.
  • The hook up among CZPT and driving shaft adopts sleeve and pin composition guaranteeing a robust connection.
  • Pace:  

 
The machine adopts frequency controller to achieve stepless pace acceleration which can achieve to 5000 moments for every hour. During true creation, it can typically operate at 3600 to 4200 instances per hour according to the good quality of the board. If the quality of the paper is very good, a very good operator even can operate the equipment at highest speed.

  • Safety:

As it is demonstrated in the image of the device, the machine adopts rear portion paper feeding method which keeps the operator absent from the die-reducing part. The mounting and adjustment of the die plate is also carried out outside of the die-cutting portion with sensors and detectors at die-reducing part to make sure that the machine can not be started when the die-reducing plate is at adjustment status.
In addition to the sensors at die-slicing component, there are sensor or technique switches at window portion to make the whole device at monitoring status to ensure its protection.

  • Operation ease:

There is Gentleman-device interface set up in the control panel which will displays the safety standing of the machine as nicely as malfunctions to facilitate the operator. Digital camera is also put in in front of the operator for him/her to check the procedure status at the delivery portion.

  • Primary Constructions and Important Material Utilised
  • Four Major Big Elements:

They are: base station, relocating platform, higher system and equipment wall. The bottom station is manufactured of gray solid iron -HT 200 the shifting platform is ductile iron – QT forty two-ten and the device wall is high quality A3 metal.

  • Main CZPT :

 

The 11 KW CZPT CZPT together with the pneumatic clutch, worm shaft and CZPT types a moving established to guarantee steady pressure out place of not significantly less than three hundred tons.
 

The materials for the worm shaft is 40Cr with quenching therapy and equipment hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is used is CZPT . The bush is copper alloy ZQSn6-6-3.

  • Die-chopping and Creasing Component:

 
The push is transferred by means of crank rod to pendulum which will carry the shifting system to shift up and down to attain die-minimize and creasing objective.
 
The pendulum is manufactured of high high quality ductile iron. The pendulum axis is completed by induction harden with floor hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 type computerized die-reducing and creasing equipment. Compared with computerized die-slicing and creasing machine which is employed for cardboard die-reducing, this kind of automatic die-cutting and creasing equipment is mainly employed for corrugated board which wants much less pressure for die-reducing, in this situation quite some producers have created more compact width on the pendulum and smaller diameter on the pendulum shaft. We preserve broader pendulum and even bigger diameter on its shaft to make CZPT machine final for a CZPT er existence.
The die-reducing plate makes use of 7 mm seventy five Crl plate which has far more hardness and existence span than the manganese plate.  
 

  • Board Conveying:

 

It adopts 3-cam intermittent positioning gadget to make certain the boarding conveying exact and steady.
 
The equipment uses gripper bar sort with 12A CZPT joints chain which is significantly less in excess weight and considerably less shock to the intermittent device underneath the precondition to make certain the toughness of the chain. The model of the chain is Renold U.K with large specific and high quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge type- light in excess weight and higher in energy.
 

  • Electric Component

 

 
The electrical elements are designed and assembled according to the CZPT pean CE common and employs planet vast identified model items.
 

  • Set up of Die

 
The die mounting and dismounting adopts side withdrawing techniques which time saving and easy for procedure.
There are two methods for the fixation of the die-possibly by bolt or clippers which are subject to CZPT er’s guidance.
 
The chase locking is pneumatic which is straightforward, handy and reputable.
 

  • Specific People of Our CZPT :

 

  • Clever And Unique CZPT Lay Design and style:

 
In comparison with the card board sheet, the corrugated board has more energy. If the corrugated board abnormally reaches to the CZPT lay, it will hurt the CZPT lay and the gripper bar when the CZPT lay reaches to its maximum position.
 
Normally the producers will put in sensors on this component to end the device when the paper is fed abnormally to the CZPT lay. Nonetheless, when the device is running at the large pace, the inertia will carry the machine to operate for a while to make the CZPT lay to its maximum point and then also harm the CZPT lay and the gripper bar.
 
Our particular design and style is that when the abnormal board feeding occurs and currently being detected, the CZPT lay can by no means reaches to its highest stage which can make free of charge from CZPT lay and gripper bar damages since of abnormal paper feeding.
 
As it is CZPT particular design, so there is no photograph to be shown right here.
 

  • None-stop Collecting device

At the shipping element, when the board is lower to be about 1 meter, the equipment will push
the die-reduce board pile out of the device shipping and delivery element making it simple for the operator to attract them to the selected place need to have not topping the machine .
 
 

 

  • Entrance-direct Feeding Portion

The equipment adopts patent engineering of CZPT -lead feeding structure which can successfully prevent and reduce damages to the surface of printed sheet. Outfitted with powerful blower, even paper is bending deformation, it can feed paper easily.
 
 

 
 
 
 

  • Configurations:

 

Name Brand and Origin Remarks
Bearing SKF Swiss Important portion
IKO Japan or HangZhou, CZPT Not crucial portion
Chain Renold U.K Primary Chain ( Discrepancy of significantly less than .2 mm for per 10 chains of machine chain duration)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Picture CZPT ctric Change Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Principal CZPT Siemens Joint Venture
PLC Delta, ZheJiang  
Man-equipment Interface Delta  
Pneumatic Areas Dawn, ZheJiang  
Rotary CZPT s SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

 
 
 
 
 
 

china  sales Automatic Platen Die Cutting and Creasing Machine with High Speed (QMY1300) manufacturers